2-in-1 Film-forming Cleanser for Heating Systems FERNOX Filter Fluid + Protector 

Exclusive inhibitor package with dispersant designed to lift and transport circulating system debris to a plant filter for safe collection and disposal.
Quick and convenient – doses in 30 seconds via a radiator, filling loop, or Fernox TF1 system filter – no need to drain the system.
To be used only in conjunction with a system filter – provides superior corrosion and scale protection in mixed metal heating and cooling systems, including aluminum.
Designed to be left in the system permanently. Treats up to 130 liters of system water (16 radiators) and the equivalent of 250 m² of underfloor systems.
Prevents the formation of scale and corrosion.
Highly effective and environmentally friendly formulation. Approved by NSF CIAS and Belgaqua.

APPLICATION, ASSEMBLY AND DOSAGE:

A single dose of this product is suitable for the treatment and protection of large properties (heating systems of 130 liters, up to 16 radiators or 250 m² of underfloor heating). Fernox Protector+ Filter Fluid F9 Express can be introduced directly through a radiator vent, the system's filling loop, or through a TF1 filter using the appropriate adapter provided with the product. Fernox Express doses in less than 30 seconds without having to drain the system, thus shortening on-site intervention. When dosing through the TF1 filter, before applying Protector+ Filter Fluid F9, it is necessary to remove any accumulated contaminants in the filter. This can be cleaned on site in less than 2 minutes. Simply isolate the filter, remove the magnet from the sheath, open the drain valve and remove contaminants before replacing the magnet and closing the drain valve. Fernox Protector+ Filter Fluid F9 Express should be left in the system. It is not suitable for use with small diameter (microbore) pipes. For single indirect fuel tanks, e.g. "Primatic" or similar models, it is necessary to use chemicals for potable water. Fernox recommends cleaning and rinsing highly contaminated systems or new systems, using Fernox Cleaner F3 or Power Cleaner F8, before treating with inhibitors. Protector+ Filter Fluid F9 should be used in conjunction with an in-line filter. The installation of a system or new boiler must comply with all applicable laws and regulations.

EASY AND SAFE PACKAGING:

Fernox Protector+ Filter Fluid F9 Express is available in 400ml pressurized cans.

Fernox Protector+ Filter Fluid F9 Express is classified as a non-hazardous product for human health, but as with all chemicals, it is recommended to keep it out of reach of children. In case of contact with eyes or skin, wash immediately and thoroughly with water.

PHYSICAL PROPERTIES:

• Fernox Protector+ Filter Fluid F9 Express is a mixture of corrosion and scale inhibitors and dispersants.
• Form: Pale yellow liquid
• Odor: Aromatic
• pH (conc.): 8.4
• pH (solution): 7.8-8.5
• Specific gravity: 1.17 at 20 °C

Product code: 62310