MGF Solar Express 2 in 1 - Filling and flushing pump for heating, solar and hydraulic systems
DESCRIPTION:
Pump for filling solar panels and flushing solar system circuits
MGF Solar System pump dedicated to filling solar panels and flushing heating systems.
The system operates at a maximum pressure of 5.2 bar, with a flow rate of 50 L/min and a head of 52 meters.
Practical, reliable, simple to use, powerful and efficient for more frequent, faster filling and flushing, even on large systems.
Those who choose to purchase the Solar System, the first and most sold pump for filling solar panels and for flushing heating circuits, benefits from a series of undisputed advantages:
FEATURES:
- Large opening for inserting antifreeze liquid or flushing liquid (210 mm), simpler to fill and clean, the best on the market
- Hooks to fix the trolley to the van, for safer transport
- All pump components resist up to 80°C, also ideal for circulating water in summer, when the solar panel brings the heat transfer fluid to high temperatures in a few minutes </span >
- Weighs only 23 kg, practical to transport. In addition, the large pneumatic wheels make it easy to transport even on construction sites and up stairs.
- 50-liter tank, greater capacity for mixing chemicals, lower center of gravity of the entire pump, and containing the foams that form during circulation and purging of the circuit
- Circular section tank with reinforcements, it does not deform when full of hot liquid
- Bayonet quick couplings on the pump side pipes and swivel couplings on the system side, easy connection of the system
- Additional connection, to recirculate two circuits at the same time, perform direct system filling during circulation, create a bypass
- Quick connection at the inlet to the pump, which can be used for decanting and additional drums: this inlet is also suitable for circulation. protected by the suction filter
- Check valve, once switched off the system remains under pressure and the tank does not empty if a pipe remains disconnected
- All controls are concentrated in the same area, the power button and the suction and delivery taps are more practical. simple to use
- Filter resistant to high temperatures (unlike cheaper transparent polycarbonate filters), therefore like all components of the pumping unit: suitable for use with the boiler on, in case of washing a heating circuit, or with uncovered panel in summer, in case of filling or purging a thermal solar circuit
- Complies with the requirements of the UNI-CTI 8065 technical standard
- Each pump is supplied equipped with a pair of 3-meter hoses, resistant to 10bar and 80°C (H.T.), in accordance with ISO R1307. Do not risk spilling chemicals due to broken hoses due to high temperatures
- Transparent flexible hose with rigid reinforcement, air bubbles easy to see and the hose does not crush
- Wide working range, pH >6.5 and pH <9
TECHNICAL SPECIFICATIONS:
| Filling pump weight | 23 Kg |
| Filling pump size | 1,000 x 450 x 500 mm |
| Maximum range | 50 L/min |
| Maximum pressure | 5.2 bar |
| Head | 52 m |
| Tank capacity | 50 L |
| Water connection | 3/4" |
| Flow | 230 V ~ 50 Hz |
| Current | 3.7A |
| Power | 500W |
| Sound pressure | 70 dB A |
| Protection | IP55 |
Product code: 905149
