DESCRIPTION

• Solenoid valves for air and non-aggressive gases (according to EN437) normally open with manual reset.

ELECTRICAL CHARACTERISTICS

• Rated voltage 230V AC 50/60Hz

REGULATIONS AND APPROVALS

• Complies with EN 161-EN60529 standards

INSTALLATION

• Check the agreement between the flow direction and the arrow embossed on the valve body, check the correct alignment of the connecting pipes. The valve can be mounted with a horizontal or vertical coil.

• The coil can in turn be oriented in any direction on 360°.

• Install in an area protected from rain, splashes or water droplets.

• For electrical connection, remove the connector cover and connect the power cables to the terminals

FEATURES

• Connections: ISO 7/1 gas threaded Rp 1/2 to Rp 2

• flanged PN16 ISO 7005 from DN65 to DN100

• Voltage tolerance -15% / +10%

  < /li >

• Ambient temperature -15°C / +60°C</ span>

• Operating pressure 500 mbar Max.

• Closing time < 1 second

• Degree of protection IP 54

• < span >PG 9 cable gland

• G1/4' pressure ports on two sides (except models with brass body)

• End of travel 3/3" on request 4' to 4'

• Gas type: air and non-aggressive gases (EN 437)