About Us

Description

AP19993 – ASPIRA ECOCOMFORT PLUS HRV DIAMETER 160 MM, WITH INFRARED REMOTE CONTROL


Ecocomfort Plus
Ecocomfort Plus is a ventilation system that allows for a constant supply of fresh air in indoor spaces, without the need to open windows, and prevents the formation of humidity and mold. A high-performance regenerative ceramic heat exchanger, located inside the unit, accumulates the heat released by the air flow extracted from the room and returns it by heating the air during the blowing cycle, thus recovering outgoing heat and avoiding energy waste. It must be installed on perimeter walls. No further configuration is required. Ecocomfort Plus is equipped with an "Iso Coarse" class filter that captures impurities present in the incoming air. It is also equipped with a low-consumption brushless DC motor, managed by a microprocessor that analyzes data from integrated sensors: temperature, VOCs (Volatile Organic Compounds), humidity and brightness. Thanks to these sensors, the unit automatically selects the most suitable ventilation mode, thus ensuring optimal comfort. The simple and intuitive remote control facilitates setup during installation and makes daily use extremely easy. Thanks to infrared (IR) technology, communication with the unit is instantaneous, allowing the user to easily manage its sensors and monitor its operating status. If several Ecocomfort Plus units are installed, only one remote control is needed to configure and control them all. General features: • The AP19993 pack includes: a ventilation unit with heat recovery, a telescopic tube and an external grille, as well as an infrared remote control. data-end="2083" data-start="2061">> fan
  • Axial extractor/fan and brushless DC motor
  • Impact-resistant telescopic PVC tube
  • Regenerative ceramic exchanger with efficiency up to 90%
  • Cross-linked polyurethane filter, coarse ISO filtration class according to EN799 standard
  • Flow straightener to ensure optimal performance (only for 160 mm diameter version – AP19993)
  • Signaling LED in the lower part of the front panel
  • Sensors: temperature, air quality (VOC), humidity and twilight brightness
  • Protection rating: IPX4

Infrared Remote Control
  • Simple and functional 12-key keypad
  • Infrared technology for even more secure communication
  • Fast with the device
  • Functional feedback via an LED indicator located at the bottom of the front cover
  • Compatible with all devices in the Ecocomfort Plus range
  • Protection rating: IP40
  • Battery life: > 24 months

Electrical characteristics:
Unit fan
  • Power supply: 110 V ÷ 230 V~ 50/60 Hz

Infrared remote control
  • Power supply: 2 AAA batteries (not included)

Product code: AP19993

Fiche technique - www.SuperSamaStore.it
Description

AP19993 – ASPIRA ECOCOMFORT PLUS HRV DIAMETER 160 MM, WITH INFRARED REMOTE CONTROL


Ecocomfort Plus
Ecocomfort Plus is a ventilation system that allows for a constant supply of fresh air in indoor spaces, without the need to open windows, and prevents the formation of humidity and mold. A high-performance regenerative ceramic heat exchanger, located inside the unit, accumulates the heat released by the air flow extracted from the room and returns it by heating the air during the blowing cycle, thus recovering outgoing heat and avoiding energy waste. It must be installed on perimeter walls. No further configuration is required. Ecocomfort Plus is equipped with an "Iso Coarse" class filter that captures impurities present in the incoming air. It is also equipped with a low-consumption brushless DC motor, managed by a microprocessor that analyzes data from integrated sensors: temperature, VOCs (Volatile Organic Compounds), humidity and brightness. Thanks to these sensors, the unit automatically selects the most suitable ventilation mode, thus ensuring optimal comfort. The simple and intuitive remote control facilitates setup during installation and makes daily use extremely easy. Thanks to infrared (IR) technology, communication with the unit is instantaneous, allowing the user to easily manage its sensors and monitor its operating status. If several Ecocomfort Plus units are installed, only one remote control is needed to configure and control them all. General features: • The AP19993 pack includes: a ventilation unit with heat recovery, a telescopic tube and an external grille, as well as an infrared remote control. data-end="2083" data-start="2061">> fan
  • Axial extractor/fan and brushless DC motor
  • Impact-resistant telescopic PVC tube
  • Regenerative ceramic exchanger with efficiency up to 90%
  • Cross-linked polyurethane filter, coarse ISO filtration class according to EN799 standard
  • Flow straightener to ensure optimal performance (only for 160 mm diameter version – AP19993)
  • Signaling LED in the lower part of the front panel
  • Sensors: temperature, air quality (VOC), humidity and twilight brightness
  • Protection rating: IPX4

Infrared Remote Control
  • Simple and functional 12-key keypad
  • Infrared technology for even more secure communication
  • Fast with the device
  • Functional feedback via an LED indicator located at the bottom of the front cover
  • Compatible with all devices in the Ecocomfort Plus range
  • Protection rating: IP40
  • Battery life: > 24 months

Electrical characteristics:
Unit fan
  • Power supply: 110 V ÷ 230 V~ 50/60 Hz

Infrared remote control
  • Power supply: 2 AAA batteries (not included)

Product code: AP19993

Fiche technique - www.SuperSamaStore.it
MARQUE by Fantini Cosmi

ASPIRA - ECOCOMFORT PLUS HRV UNIT WITH INFRARED REMOTE CONTROL D. 160 MM

SKU:AP19993

Regular price
366,20 €
Sale price
366,20 €
Regular price
Tax included. Shipping calculated at checkout.
Delivery in 2 to 3 days
Fast delivery throughout Belgium. Free on orders over €200.
You have 30 days to return your product.
Free returns for any product not installed in its original packaging.
2-year warranty
Parts and labor covered. 24/7 STS technical support included.

You might also like